Effect of storage and curing conditions at elevated temperatures on aerogel-incorporated mortar samples based on UHPC recipe

Serina Ng, Bjørn Petter Jelle, Yingpeng Zhen, Ólafur Haralds Wallevik

Rannsóknarafurð: Framlag til fræðitímaritsGreinritrýni

45 Tilvitnanir (Scopus)

Útdráttur

The effect of elevated temperature during storage and curing of ultra-high performance concrete (UHPC) formulated aerogel-incorporated mortar (AIM) samples was investigated. It was found that an effective aerogel loading of 60 vol% of total bulk volume was possible for producing AIM samples with suitable thermal and mechanical properties under optimized storing and curing conditions. AIM samples with compressive strengths of up to 9 MPa was achieved and the corresponding thermal conductivity was 0.4 W/(mK). For more insulating concrete, 70 vol% aerogel was needed and AIM samples with thermal conductivity as low as 0.1 W/(mK) were cast. In general, AIM samples with strengths of up to 5 MPa can be achieved when thermal conductivities of between 0.1 and 0.2 W/(mK) is desired. The obtained results here estimates that there is potential in improving the AIM samples to produce structural and insulating concrete through modification of storing and curing conditions to achieve the desired requirements of a thermal conductivity value of <0.1 W/(mK) with a corresponding compressive strength of >20 MPa.

Upprunalegt tungumálEnska
Síður (frá-til)640-649
Síðufjöldi10
FræðitímaritConstruction and Building Materials
Bindi106
DOI
ÚtgáfustaðaÚtgefið - 1 mar. 2016

Athugasemd

Publisher Copyright:
© 2015 Elsevier Ltd. All rights reserved.

Fingerprint

Sökktu þér í rannsóknarefni „Effect of storage and curing conditions at elevated temperatures on aerogel-incorporated mortar samples based on UHPC recipe“. Saman myndar þetta einstakt fingrafar.

Vitna í þetta