Broad Stopband, Low-Loss, and Ultra-Compact Dual-Mode Bandpass Filter Based on HMSIRC

In this investigation, an ultra-compact dual-mode bandpass filter (BPF) with a wide stopband response is realized by using a half-mode substrate-integrated rectangular cavity (HMSIRC). The HMSIRC resonator is designed with a cavity that is rectangular in shape and has metallic vias along three of the sides. The fourth side is open-ended and contains microstrip feed lines. For the purpose of constructing a magnetic wall, a rectangular slot is cut into each of the HMSIRC’s three edges. In order to produce an electrical wall that may generate a variety of resonances, the side with the open edges is provided with a single metallic via in the center. After that, a second-order BPF is generated by loading a transverse slot in the middle of the BPF, which enables independent frequency regulation of the mode frequencies. The eigen-mode analysis; field distributions; coupling matrix; and full-wave simulation of the proposed HMSIRC filter topology are used to develop the working principle of the filter. A second-order BPF is realized, constructed, and experimentally validated in order to provide evidence that the theory is correct. The BPF prototype achieves satisfactory performance thanks to its compact footprint of 0.028 λ_g²; its broad passband of 15.9%; its low insertion loss of 0.41 dB; and its wide stopband of 4.36 f₀ with a rejection level greater than 20 dB. Both the measured and EM-simulated responses of the BPF are very consistent with one another.